Try / Catch (container)
A container with Try, Catch and Finally zones. Commands in Try run first; if one errors, the Catch zone runs ('Error.Message' is set); the Finally zone always runs.
개요
Try / Catch (container)은(는) AutoFlowRPA의 Error handling 카테고리에 속한 노코드 자동화 단계입니다. 다른 단계를 그 안에서 실행하도록 묶는 컨테이너 역할을 합니다. 그대로 실행되며 매개변수가 필요 없습니다. 비주얼 빌더에서 워크플로로 끌어다 놓을 수 있는 340개 명령 중 하나이며, 스크립트가 필요 없습니다.
기능 소개
A container with Try, Catch and Finally zones. Commands in Try run first; if one errors, the Catch zone runs ('Error.Message' is set); the Finally zone always runs.
파라미터
이 명령에는 파라미터가 없습니다 — 캔버스에 놓고 연결하기만 하면 됩니다.
Try / Catch (container) 사용 방법
- 1
AutoFlowRPA를 열고 Error handling 그룹에서 Try / Catch (container) 명령을 캔버스로 드래그하세요.
- 2
Try / Catch (container)에는 파라미터가 필요 없습니다 — 실행할 위치에 놓기만 하면 됩니다.
- 3
워크플로에 연결한 뒤 Run을 누르세요. 모든 작업이 내 컴퓨터에서 로컬로 실행됩니다.
자주 묻는 질문
Try / Catch (container) 명령은 무엇을 하나요?
A container with Try, Catch and Finally zones. Commands in Try run first; if one errors, the Catch zone runs ('Error.Message' is set); the Finally zone always runs.
Try / Catch (container) 명령은 어느 그룹에 속하나요?
Try / Catch (container)은(는) Error handling 그룹에 속합니다. AutoFlowRPA는 코드 없이 조합할 수 있는 340개 이상의 바로 쓰는 명령을 제공합니다.
Try / Catch (container) 명령에 파라미터가 있나요?
아니요 — Try / Catch (container)은(는) 파라미터 없이 동작합니다.